1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Greetings Guest!!

    In order to combat SPAM on the forums, all users are required to have a minimum of 2 posts before they can submit links in any post or thread.

    Dismiss Notice

[Tailoring] Any ideas how to make MR3 and 5 HCI studded pieces?

Discussion in 'UO Craftsman' started by Arcades, Jun 28, 2014.

  1. Arcades

    Arcades Sage
    Stratics Veteran

    Joined:
    May 14, 2008
    Messages:
    551
    Likes Received:
    94
    Just wanted to see if these were possible?
     
  2. Loren

    Loren Journeyman
    Stratics Veteran

    Joined:
    Aug 5, 2011
    Messages:
    299
    Likes Received:
    90
    HCI 5 will be easy one. Use a spined runic, select Powerful > Grand > Inspired > Slaughter. 4 charges per try so you can get 11 attempts out of each runic. Now, if you wanted MR3 and 5HCI, you would need to burn 2 more charges each attempt and specify from 3 choices which could all end up placing MR on the armor. I would go with Mystic since Arcane and Invigorating both have "Armor Only" mod chances which you do not want here. Note that if you try and up the power with Structural, Fundamental (or both), then you can not select Slaughter.

    I just made a studded gorget, with MR3 and HCI 4 just for kicks. The only time I have gotten HCI 5 was when trying for only the HCI. If you can live with HCI 5 and MR2, that would be much easier since you can imbue the MR2, but that is not what you asked.

    Good Luck.
    -Loren. a.k.a. Armani
     
  3. Tuan

    Tuan Slightly Crazed

    Joined:
    Nov 2, 2013
    Messages:
    1,371
    Likes Received:
    275
    Probably be a lot easier to do with a plate gorgot and use a copper hammer...
     
  4. Arcades

    Arcades Sage
    Stratics Veteran

    Joined:
    May 14, 2008
    Messages:
    551
    Likes Received:
    94
    Thanks for the tests Loren. I bought a pair of leather sleeves with "Arcane and Slaughter" that had 5HCI, 3 MR and 15 kinetic. Figured I would try to make the bone/studded equivalent (for the 55 LMC). After burning a few hundred charges on TC I came to the conclusion its either extremely rare to get both max mods using a spined kit or those sleeves were pre-patch. Ah well...guess ill go MR3 and 4 HCI. But thanks for the efforts.