1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Greetings Guest!!

    In order to combat SPAM on the forums, all users are required to have a minimum of 2 posts before they can submit links in any post or thread.

    Dismiss Notice

[Tailoring] Help with Gorget Please

Discussion in 'UO Craftsman' started by Yen Sid, Apr 26, 2010.

  1. Yen Sid

    Yen Sid Guest

    Ok, so here is the deal, I have 120 Tailoring/100 Arms Lore yada yada yada. So I am fishing for some advice on a Gorget for my Sampire. I would like to know what is the best Gorget to make first off and the best way to get high fire resist. Gold isn't a problem really, so I was thinking, Barbed Runic Kit, use regular leather, Powder up the best one, Imbue everything I want, then enhance with horned leather for fire resist? Any other suggestions would be helpful, thanks in advance.
     
  2. Gelf

    Gelf Guest

    well depends on how much fire resist you want and what other properties you want. most aren't using barbed kits much(unless you got several u want to burn),as the chances of getting what u want are low.

    Myself i'd just make alot of plain leather gorgets then sort though them to get ones i want.Depending on where ur excep and arms lore bonus fell, the things you would be looking for is either extremely high fire resist(19 or better) or low to no resist(just 4 or about on fire).also you would want them to have 1-4 low mods(where you get little to no ex. and arms lore bonus on resists).
    without knowing your total suit specs and what u want on gorget(suit), hard to get more specific than that.
     
  3. Yen Sid

    Yen Sid Guest

    I have about 20 kits laying around lol. Well basically the only things I need at this point is the high fire and stam increase. Other things could be added later hpi or mi, but that doesn't matter as much as fire and stam. After you make one enhance with horned for more fire resist?
     
  4. Gelf

    Gelf Guest

    ya if ur going the imbue route, you enhance with horned after imbuing resists(if u imbued the fire would max at 22 i believe,after enhancing with horn). if u r usin a barbed kit probally just better to make with horned.

    one note if u r going to use POF gotta do before u imbue
    how much fire resist u got on suit now? and what u aimin for total?

    just checked on enhance calculator, if u pof to 255 and imbue just fire to max(19) ,u have a 42% break chance and a 26% success chance,with horned
     
  5. Shelleybean

    Shelleybean Certifiable
    Stratics Veteran Stratics Legend

    Joined:
    Jan 30, 2003
    Messages:
    1,856
    Likes Received:
    51
    How high does your fire resist need to be?
     
  6. Yen Sid

    Yen Sid Guest

    25 would be perfect :). I have a feeling I won't ever get that high lol. I will have to swap some other things around, thanks for the help.
     
  7. Lorax_Pacific

    Lorax_Pacific Lore Master
    Stratics Veteran

    Joined:
    Sep 1, 2006
    Messages:
    1,012
    Likes Received:
    63
    If you can wear wood armor instead of tailoring...Use bloodwood and you wont have a problem reaching 26 and you can either use a heartwood saw or imbue and then enhance. You will get an extra +8 for bloodwood in fire. the intensity would be 26/18*100~=145.

    If you want damage increase then a heartwood saw on heartwood can get you high fire. On the test center I made 28 items and one heartwood DI 10 piece was 25 fire. Using the heartwood saw and bloodwood and hitting 15 times I got 5 pieces with fire at 23, 25, 25, 27, 29.

    -Lorax